The 10 Best Plumbing Services in Kansas City, KS (with Free Estimates) (2022)

Q & A

Answers to commonly asked questions from the experts on Thumbtack.

How much do plumbers charge per hour?

Depending on the service you need (unclogging a drain, fixing a pipe, installing new pipes, etc.), plumbers charge anywhere from $45-$165 per hour. Plumbers often operate on afixed rate model, too. Some won’t charge hourly rates because the variables involved in their work makes it less practical to do so.

Plumbers will scope out the work, calculate the cost of parts, and roll it together with other fees to give you an estimate for the job. They may even offer standard flat rates for things like installing a toilet or a sink. Reach out toplumbers near youto get an accurate cost estimate for your project or repair.

Does a plumber need to enter my home?

A plumber will need to enter your home to fix plumbing issues like dripping faucets, clogged sinks or toilets and leaky pipes. They might not need to come into your home if the faulty appliance is located outdoors or in the garage. Before you begin the project,contact plumbers near you to find out they will need to enter your home.

How long is a water heater supposed to last?

Your water heater is an essential part of your home, heating water for showers, dishwashing, laundry and more. On average, a traditional water heater will last 8-12 years. The general consensus is that it’s better to replace your water heater with a new one than to repair one that’s 10 years old or more. Older models are less energy-efficient and thus more costly to run than newer models with better technology. Here are some indicators of when it may be time to replace an old water heater instead of repairing it:

  • Leaks: If leaking is not caused by loose connections, the water may be seeping out through slight fractures in the metal of the tank that have formed over time.
  • Strange noises: Clanking, rumbling and other noises can mean that sediment has formed on the base of your tank, contributing to fissures leaks, and inefficiency.
  • Age: If it’s more than 10 years old, it’s probably time to replace.
  • Discolored or rusty water: Have a pro check it out; if the problem isn’t resolved by draining and cleaning, you’ll want to replace the heater.
  • Lack of hot water: Inconsistent heating and hot water supply that runs out too quickly likely means it’s time for a new unit.

What happens when a water pipe bursts?

When a pipe bursts, the water can cause indoor flooding and damage your home. If the pipe is in an accessible location, you will likely notice puddles of water right away. However, if the pipe is underground or behind a wall, it may cause reduced water pressure, a sulfur smell or discolored water. All of this can cause significant (and expensive) damage, which is why you should always contact a plumber near you if you suspect your pipes are leaking.

(Video) "AC Repair Kansas City" | The Best HVAC and Plumbing in Kansas City | Kansas City AC Repair

Can a leaking pipe burst?

Yes. A leak in your pipe can build up pressure and wear through the material. Left unchecked, this pressure can cause the pipe to burst. This is why it’s so important to fix your pipes and contact a plumber as soon as you notice a leak — no matter how small or insignificant it may seem.

Smaller leaks are easier and inexpensive to fix, saving you time and money in the long run. In addition, many insurance policies will not cover water damage for pipes that burst due to gradual leaks.

What do you do if you have a burst pipe?

First, switch off the water supply to reduce the water damage. You should also turn off the electricity for the part of your home that has sustained the leak, as it can be extremely dangerous if the water comes into contact with an electrical socket. Next, drain the remaining water from your faucets so it doesn’t freeze inside the pipes.

Once you’ve done all of this, search for qualified plumbers in your area and ask them to provide you with a quote.

What’s the best way to set up a consultation or an appointment with a plumber during the COVID-19 pandemic?

If possible, it’s best to set up a virtual consultation or phone call with a plumber near during the COVID-19 pandemic. You can send a message to a professional plumber near you and ask if they are available to video chat or have a phone call. Use that time to discuss the work that needs to be done. Make sure to ask any questions you have about the project. And lastly, ask the plumber how they handle payments and whether they have any specific safety precautions in place to comply with social distancing.

What are the signs of a burst pipe?

If your water pressure has suddenly dropped or your sink and toilet have unexpectedly started clogging, you may have a burst pipe. Other tell-tale signs include watermarks on the wall of your bathroom or laundry room, drips or puddles in your home or basement, or water from your faucets that have suddenly turned brown. You may also notice a strange rotten-egg smell or the sound of gurgling water in your home.

If you notice any of these signs, contact a plumber near you to fix your pipes immediately.

(Video) Plumber Causes Major Flood In Apartment

Does insurance cover a broken pipe?

Sudden water damage may be included under most homeowners’ insurance policies, but it’s typically not covered if the damage could have been avoided with proper maintenance.

For example, if a pipe in your laundry room suddenly bursts and causes damage to the flooring and walls, that is usually covered by insurance. But if a pipe under your sink has been leaking for months and causes your wood floors to rot, your policy won’t cover that damage.

Always double-check with your insurance agent (or another expert) to see what your policy covers.

How much does it cost to repair a broken pipe?

The national average cost to repair broken pipes ranges from $120 to $170. Prices can vary depending on the type of damage, whether the pipe is easily accessible, the materials needed and where the pipe is located. For example, an exposed pipe under the sink will likely cost much less than a pipeline in your yard that requires digging.

Your overall cost will also depend on the hourly rate of the contractor. Most plumbers charge between $60 and $65 per hour for standard pipe repair, and up to $95 per hour for complex plumbing work.

Contact the best pipe repairers in your area to find out how much it will cost to fix your pipe(s).

(Video) HVAC Contractors Kansas City - FREE Estimates | Kansas City HVAC Contractors

To learn more about pricing factors, read “How much does pipe repair cost?

Reviews for Kansas City plumbers

Dannetta P.

Zachary made quick work of our plumbing issue.

The 10 Best Plumbing Services in Kansas City, KS (with Free Estimates) (1)Pierpoint Plumbing

Spencer B.

Very prompt and great work. Would highly recommend to anyone needing any plumbing work.

The 10 Best Plumbing Services in Kansas City, KS (with Free Estimates) (2)Kelley Plumbing & Construction LLC

(Video) (Best Job in the World) J&J Plumbing, Heating & Cooling Technician

Tiffany E.

Very good experience. Very quick, easy and polite. Explained things in a way good for people who don’t know anything about plumbing could understand. Really personable! Would recommend to others.

The 10 Best Plumbing Services in Kansas City, KS (with Free Estimates) (3)Cantrell Plumbing

Dachia B.

Excellent job! I’m not sure what B&L’s basic service looks like but I feel Mr. Jason and Mr. Vince went above and beyond! I would definitely use B&L Plumbing again. Thank you both for your efficient and flexible service! Happy New Year!

The 10 Best Plumbing Services in Kansas City, KS (with Free Estimates) (4)B&L Plumbing Service, Inc.

Ahnya C.

Blaine got a hold of me shortly after I requested qoute on Thumbtack. He came out the following day to look at my issue. My bathroom leak was due to an aged faucet. I didn't want a faucet on his truck. Only because I am picky like that. He allowed me to pick out my own faucet and came back the following day.He was prompt/personable, wore booties into my home, made contact 20-30 min prior to each arrival and offered knowledgeable advice on our old plumbing and did a great job overall.We have future work needed done in our kitchen. We will be sure to give him a call.Thanks Blaine!

The 10 Best Plumbing Services in Kansas City, KS (with Free Estimates) (5)Cantrell Plumbing

Ready to find a pro?

See more reviews, compare prices, and hire your favorite pros all with Thumbtack.

(Video) Affordable Plumber San Diego | Best Plumbing Repair

FAQs

How do I find the best plumbing company? ›

7 Tips for Finding the Right Plumber
  1. Make sure your plumber is licensed and insured. ...
  2. Ask how long they have been in business for. ...
  3. Inquire about written estimates. ...
  4. Check reviews and references. ...
  5. Compare competition. ...
  6. Personal referrals. ...
  7. Professional referrals.

How do you evaluate a plumber? ›

General tips on hiring a Plumber.

Consider only licensed plumbers, especially if your state requires licensing, as most US states do. Evaluate only plumbers who can deliver proof of insurance. Ask the plumber how long has he/she been in the plumbing industry. The more experience the plumber or company has, the better.

What services do most plumbers offer? ›

What Services Do Plumbers Offer?
  • Installation, Inspection, and Replacement. ...
  • Toilet Repair. ...
  • Leak Repairs. ...
  • Drain Cleaning. ...
  • Pipe Repair and Replacement. ...
  • Water Heater Services. ...
  • Sewer Repair.

What are some common plumbing questions? ›

5 Most Commonly Asked Plumbing Questions
  • 1) Why does the toilet keep running? This is probably the most commonly asked plumbing question. ...
  • 2) What can I put in my garbage disposal? ...
  • 3) Is it safe to use chemical drain cleaners? ...
  • 4) Why do we run out of hot water so quickly? ...
  • 5) Why does my drain get clogged?

What is the most common residential plumbing problem? ›

The most common plumbing problems are clogged drains and toilets, leaky faucets and pipes, water heater issues, low water pressure, and a running toilet.

How can I save money on plumbing repairs? ›

Ways to Save Money on Plumbing
  1. Ways to Save Money on Plumbing.
  2. Ensure Your Toilet Is Flushing as It Should.
  3. Turn Off Your Taps Properly.
  4. Repair Leaks and Cracks Quickly.
  5. Install Low-Flow Toilets and Showerheads to Save Money on Plumbing.
  6. Locate Your Shut-Off Valve.
  7. Save Money on Plumbing.
23 Aug 2021

Do plumbers do free quotes? ›

Most professional plumbers offer clients a free estimate, which means they will come to your house, look at the job, and quote you an estimated cost. Don't let a plumber give you a price over the phone without looking at the repair first, because any estimate given this way will most likely be inaccurate.

Can you negotiate with a plumber? ›

Furthermore, sometimes (but not always) plumbers have some negotiating room on their flat rate. If you don't like the price, try haggling. The worst that can happen is he says “no.” But if a plumber is having a slow day, he may be willing to drop his rate somewhat to get the job.

How many plumbing quotes should I get? ›

Comparing quotes is the best way to find a plumber who will give you your dollar's worth. If you can, get at least three quotes from qualified plumbers before taking next steps.

What do most plumbers charge per hour? ›

Plumbers usually charge for their work by the hour, and the national average cost is about $100 per hour plus a service fee or minimum charge. Overall, hourly rates for plumbing can range from $25 to $200, depending on the experience level of the plumber and on the repair needed.

Why do plumber charge so much? ›

Plumbers Are Highly Skilled

Professional plumbing requires a set of unique skills and knowledge that come more naturally to some people than others, and when you hire a plumber, you're paying for their expertise in their field.

What is a plumber most likely to install? ›

It could be time to call in a plumber! Plumbers install, repair and service almost anything relating to plumbing equipment: that means water pipes, fixtures, central-heating system, drinking-water systems, and waste-disposal systems (or toilets, as you might know them better).

What are the 3 stages of plumbing? ›

A home plumbing installation isn't completed all at once but in 3 stages, to be exact: Underground rough-in phase. Aboveground rough-in phase (top-out or stack-out) Finishing phase (Trim-out or trim finish)

What are the 3 main regulations plumbers have to follow? ›

The three main requirements of the regulations are: Plumbing systems, water fittings and water using appliances must be installed and maintained to comply with the regulations. Contamination of drinking water must be prevented. Advance notice of plumbing installation work must be given.

What are 3 things plumbing plans include? ›

A plumbing plan illustrates the system that will bring water in and take waste back out. It typically includes water supply lines, drains, vent pipes, valves, and fixtures such as toilets and sinks.

What type of plumbing lasts the longest? ›

Drainage pipes are often made of cast iron or polyvinyl chloride, or PVC. Cast iron will last anywhere from 75-100 years while PVC wins the award for longest-lasting pipe material with an indefinite lifespan.

How often should home plumbing be replaced? ›

The lifespan for the most common residential plumbing systems are: Brass: 40 to 70 years. Copper: 50 or more years. Galvanized steel: 20 to 50 years.

How often should sewer lines be replaced? ›

Generally speaking, you're going to find that most main sewer lines will only last somewhere between 50 and 100 years before you need to do main sewer line replacement.

Are plumbing service plans worth it? ›

A system may be able to withstand months or years of no service calls, but the eventual breakdowns will be major and so expensive that replacement components might be necessary. Plumbing and HVAC maintenance plans are worth the money when it comes to building relationships.

How much should you spend on repairs? ›

Even a small amount can quickly add up. A rule of thumb is to set aside 1%-4% of your home's value for a home maintenance fund. For example, for a home valued at $200,000, you would budget $2,000 to $8,000 per year to spend on annual upkeep.

Does Roto Rooter do free quotes? ›

If you decline the estimate, he'll leave, and you'll likely pay nothing at all. Most Roto-Rooter locations* do not charge trip fees or for estimates.

Do contractors give free quotes? ›

Estimates are usually free for small, simple jobs like painting a bathroom. A contractor will charge for an estimate for complicated, big projects that involve detailed designs and multiple plan revisions, such as building an addition to your home.

How long do I have to pay a plumber? ›

Most plumbers work to 30 day payment terms. That's fine, but when setting that out it needs to be made clear that late payment is not acceptable.

Is it worth calling a plumber? ›

Frozen pipes, major leaks, backups, problems with the water main and more can cause you to lose water. You should call a plumber quickly because either the water was turned off or the water that should be going into your home is leaking somewhere else.

Do contractors expect you to negotiate? ›

Many general contractors are willing to negotiate their prices and terms if they're competing for a job. It is helpful to be up-front with contractors and let them know what you expect from the process: Prepare to answer the contractor's questions, as this will help craft a more exact estimate.

How do you negotiate a quote? ›

To write a price negotiation letter, try to follow these steps:
  1. Use a positive tone. It's important you keep a positive tone throughout your negotiation letter. ...
  2. Compliment the supplier. ...
  3. Explain your perspective. ...
  4. Request a discount. ...
  5. Set clear terms. ...
  6. Hint at an incentive. ...
  7. Choose a date for a response.

How much does it cost to Repipe a 1000 sq ft house? ›

The average cost to replumb a house will vary between $5,000 to $7,000. However, the total cost of repiping a house may be as high as $15,000 depending on a variety of factors. These variables include pipe location, number of bathrooms, quantity of fixtures, and how many stories a home includes.

How much does it cost to put plumbing in a 2000 sq ft house? ›

To replace the plumbing in an existing structure, expect to pay between $50 and $200 per hour for labor plus the cost of materials. The total cost to replace the plumbing system in a typical 2,000-square-foot home averages between $3,000 and $16,000.

How much do local plumbers charge? ›

A qualified plumber near you will typically charge between $45 to $200 per hour or more. Recent data from HomeAdvisor found a range of $175 to $480 with an average cost of about $330.

How much does unclogging a toilet cost? ›

The plumber may also need to use tools such as a snake and will charge for it in addition to the hourly rate. The average cost of unclogging a toilet ranges from $113 to $327.

How do you calculate labor cost for plumbing? ›

Figure out your total labor costs

Just multiply the expected labor hours by your hourly rate. If you're servicing a clogged drain and you know it'll take you two hours to complete, your total labor costs would be $112 (2 hours x $56 per hour).

How much does it cost to plumb a 3 bathroom house? ›

The cost to plumb a new 2,000 square foot home with 2 or 3 baths ranges from $8,000 to $12,000 on average.
...
Rough-In Plumbing Cost for New Construction.
Number of BathsAverage Cost
One Bath$1,500 – $3,000
Two Baths$3,000 – $6,000
Three Baths$4,500 – $9,000
Four Baths$6,000 – $12,000

How much does it cost to replace pipes under bathroom sink? ›

How Much Does It Cost to Install a Bathroom Sink Drain? HomeGuide says the average cost to replace a drain is between $500 to $800 for a reasonably simple pipe replacement job. There are several things that can increase the cost of this, however.

How much do plumbers make? ›

The average plumber salary in Singapore is S$34,800 per year or S$17.85 per hour. Entry-level positions start at S$24,000 per year, while most experienced workers make up to S$47,280 per year.

How much does a plumber charge to unclog a kitchen sink? ›

The national average cost for unclogging a kitchen sink is between $250 and $400, with most people paying around $300 to unclog a kitchen drain using an electric snake. On the low end of the price range, some people only spend $100 to have minor clogs removed when they are not part of the main, using an electric snake.

What to do while waiting for a plumber? ›

In the meantime, here are six things that you should do while you wait for an emergency plumber:
  1. Turn Off the Water. The first thing you should do is turn off the water. ...
  2. Drain The Lines. ...
  3. Clear All Standing Water. ...
  4. Check All Electrical Appliances. ...
  5. Move Furniture From Wet Areas. ...
  6. Take Notes And Pictures.
31 Oct 2022

What is the most important plumbing fixture? ›

Toilets – This is the most important plumbing fixture in any household or business. Toilets use a flush system to move waste out of your home or business and into a septic tank or community sewage system. Since they are in constant use, problems will eventually occur and therefore repairs are needed.

What are the 4 types of plumbing? ›

There are five main types of plumbing pipe materials that are still in use today: copper, galvanized steel, polyvinyl chloride (PVC), acrylonitrile butadiene styrene (ABS), and cross-linked polyethylene (PEX).
...
  • PVC Pipes. ...
  • PEX Pipes. ...
  • ABS Pipes. ...
  • Copper Pipes. ...
  • Cast Iron and Galvanized Steel Pipes.
30 Apr 2021

What is a Level 3 Plumber? ›

Level 3 is ideal if you are working within the plumbing and heating trade and have a great deal of technical skills and knowledge. You work with minimum supervision and have a good record of safety, fault correction and ensuring that work meets the required standard.

What does a plumbing rough in include? ›

Rough-in plumbing is the process of installing vents, sewers, connections and waterlines. During the finish plumbing phase, plumbers will finish installations and connections to get the home ready for use.

What is a main cleanout? ›

A drain cleanout provides access to your main sewer line and is located outside of your home in the front or back yard. Cleanouts typically go unnoticed until there is a problem. They look like capped pipes sticking a few inches above the ground.

What are dos and donts of plumbing? ›

Plumbing 101 — the Do's
  • Have the Right Tools for the Job. ...
  • Turn off All Water Before You Start. ...
  • Use Natural Methods to Unclog Your Drains. ...
  • Don't Put Trash in Your Garbage Disposal. ...
  • Don't Overtighten Plumbing Connections. ...
  • Don't Hesitate to Call for Help.
12 Mar 2021

What two things must every fixture have in plumbing? ›

Each of these plumbing fixtures has one or more water outlets and a drain. In some cases, the drain has a device that can be manipulated to block the drain to fill the basin of the fixture.

What are the two main plumbing systems in a home? ›

House plumbing consists of two systems: Water supply system. Drain-water vent system (DWV)

What is the first step in a plumbing installation? ›

Step # 1: Start Drilling Through Sills:

Drilling is the first step in residential plumbing. Start drilling through the sill plates and below the floor to make room for the water pipes. Make sure your holes are at the same distance so that the water lines run parallel to the floor.

How long does it take to put plumbing in a house? ›

So how long does it take to install plumbing in a new house? Typically, the plumbing process for smaller homes can take around five days. Larger multi-family homes can take a few weeks, depending on the number of bathrooms you need to install. The first step of this process is called the rough-in.

What plumbing lasts the longest? ›

Drainage pipes are often made of cast iron or polyvinyl chloride, or PVC. Cast iron will last anywhere from 75-100 years while PVC wins the award for longest-lasting pipe material with an indefinite lifespan.

What is the best home repair company? ›

The Best Home Repair Services of 2022
  • Best Overall: Mr. Handyman.
  • Best for Residential: Ace Handyman Services.
  • Best for Free On-Site Consultation: Handyman Connection.
  • Best for On-Demand Repairs: ProConnect Home Solutions.
  • Best for Plumbing: Roto-Rooter.
  • Best for Electrical: Mister Sparky.

How much does it cost to repipe a 2200 square foot house? ›

The average cost to replumb a house will vary between $5,000 to $7,000. However, the total cost of repiping a house may be as high as $15,000 depending on a variety of factors.

How much does it cost to repipe a bathroom? ›

Of course, the overall expense can vary greatly, depending on the parts you need and whether you're replacing a current system or installing an entirely new one. Most plumbing projects run within a range of $2,280 to $5,120, though extensive jobs can even go up to $15,000.

What is the most reliable plumbing pipe? ›

Copper Pipes

Copper is very durable, and it has been the traditional plumbing material since the 1960s. Other materials have been introduced since then, but copper is still one of the best options.

How long does PVC plumbing last in a house? ›

As one of the most-used plumbing materials, PVC pipe is known for being very durable and long-lasting. In fact, PVC pipes last approximately 100 years.

Why are plumbers charging so much? ›

Plumbers Are Highly Skilled

Professional plumbing requires a set of unique skills and knowledge that come more naturally to some people than others, and when you hire a plumber, you're paying for their expertise in their field.

What is most costly home repair? ›

Here are the top 10 most expensive home repairs:
  1. Foundation repair. ...
  2. Roof repair. ...
  3. Repair or replace hot water heater. ...
  4. Termite damage. ...
  5. Water damage. ...
  6. Repair or install new pipes. ...
  7. Heating/AC repair. ...
  8. Mold Removal.
18 Oct 2022

What home improvement adds the most value? ›

7 Home improvement projects that add value (and 3 that don't)
  • Remodel the kitchen. Updates to the kitchen pay off. ...
  • Upgrade the appliances. ...
  • Boost the bathrooms. ...
  • Remodel the attic or basement. ...
  • Get decked out. ...
  • Boost curb appeal. ...
  • Improve energy efficiency.

What is the most popular home improvement? ›

Here are the top 10 projects as they rank nationally:
  • Bathroom renovation.
  • Kitchen renovation.
  • Landscaping.
  • First-floor addition.
  • Deck.
  • Exterior painting.
  • Backyard home (accessory dwelling unit)
  • Interior painting.
17 Feb 2022

Videos

1. Yelp Plumber San Diego | Affordable Plumbing Repair
(Charlie Gonzales)
2. Talkin' Poop with a Plumber - Episode 2
(Roger Wakefield)
3. The SECRET to PASSING the Plumbing Exam
(Roger Wakefield)
4. Septic Tank |Septic pumping | Septic services- Mr. Drain Plumbing
(Mr Drain Plumbing)
5. Judge Judy Best Cases #9211 Judy Justice Amazing Episode Full HD 2022
(Nuray metbexde)
6. Best Plumber in Cherry Hill NJ | All-Out Plumbing | Cherry Hill's Top Rated Plumbers
(Lead Hound)

Top Articles

You might also like

Latest Posts

Article information

Author: Edmund Hettinger DC

Last Updated: 09/13/2022

Views: 6340

Rating: 4.8 / 5 (58 voted)

Reviews: 81% of readers found this page helpful

Author information

Name: Edmund Hettinger DC

Birthday: 1994-08-17

Address: 2033 Gerhold Pine, Port Jocelyn, VA 12101-5654

Phone: +8524399971620

Job: Central Manufacturing Supervisor

Hobby: Jogging, Metalworking, Tai chi, Shopping, Puzzles, Rock climbing, Crocheting

Introduction: My name is Edmund Hettinger DC, I am a adventurous, colorful, gifted, determined, precious, open, colorful person who loves writing and wants to share my knowledge and understanding with you.