Are you looking for a plumber to come out and fix your home’s plumbing? If you are a mobile homeowner, you must have wondered, where can I get a mobile home plumber near me?
Looking for plumbing services may seem like an easy task, but there are many things that can go wrong with the plumbing systems in your house or business.
If you need a plumber who can help with any plumbing issues on your mobile home system, then look no further. We have the perfect solution for you. Our company is dedicated to providing quality service to our customers.
Just call us right away. Our phone number is listed at the top and bottom of this page. To request a free estimate, please visit our official website (https://www.emergencyplumbingsquad.com/)
Frequently Asked Questions When Trying to Get a Plumber
When looking for an efficient plumbing service, we understand that you get to ask yourself some questions.
We have tried to answer them as much as we can. We know how important it is to get the right plumber. And that’s why we strive to give you all the answers to the questions you have.
Is mobile home plumbing different?
Mobile homes have their own set of plumbing codes. These special rules govern everything from water pressure to what chemicals can be used in a plumber’s tank.
Areas such as Oregon have an altogether different code for these properties, which means there are some interesting differences when it comes time to fix the leaks or turn on your taps.
The cost of living in a mobile home is much lower than that of traditional-style housing. This means the types and styles used for these structures are also cheaper, so it’s important to know about plumbing when you think about buying or building your new place.
Many tiny houses and mobile homes have toilets, showers, and water heaters, but the fixtures are usually much smaller.
What are these mobile differences?
Before looking for a plumber for a mobile home near me, it’s important to understand mobile differences.
Compared to traditional plumbing, mobile home plumbing has the following differences. These differences are based on the size, shape, and affordability of mobile homes.
Materials
The pipes approved for use in mobile homes during the 1960s and 1980s often did not meet the standards for larger, more established structures.
Copper is and has been the pipe material of choice for most modern homes, but plastic pipes are more common among older mobile homes. Modern mobile homes solve this problem by using PEX tubing, which often lasts longer than copper pipes.
Location of pipes
Because mobile homes differ from traditional homes in their structure, it is not surprising that the location of pipes also differs.
In mobile homes, water lines run from floor to wall, just like in traditional homes where they originate in the wall. Both types of pipes work in the same way and are equally efficient.
It is important to keep in mind that the location of pipes in mobile homes differs from the placement of pipes in traditional homes when changing plumbing fixtures. For example, there must be enough space in sink cabinets for water pipes to fit.
Additionally, you may have to use straight stop valves instead of angle stop valves when connecting your water lines, in order to maximize space.
What kind of plumbing is used in mobile homes?
Most mobile homes use plastic. Plastic piping is used in mobile home plumbing because it is much easier to work with and less costly.
Mobile homeowners can enjoy the benefits of plastic piping because it is relatively inexpensive to work with, easy to replace when necessary, and also durable in most weather conditions. It can be used in sewer lines or water supply pipes.
Some mobile homes are equipped with copper piping instead of plastic piping because it is more durable in certain conditions. However, there are still many mobile homes that are equipped with PVC piping.
The key difference between plastic and copper is that plastic has a longer life expectancy than copper piping, although both types of pipes will need to be replaced eventually.
What are the most common plumbing problems?
Plumbing problems vary depending on the home and may be specific to a smaller area of the house, such as a bathroom. Understanding the common problems may help prevent future problems, reduce costs and even improve water quality.
Some of the most common plumbing issues include:
Clogs
Detergents, grease, or another buildup can clog your drain lines or drains in your home, leading to slow drainage caused by pockets of standing water. One way to avoid this issue is to avoid using your garbage disposal. Once the food is ground up, it has a much greater surface area to stick to the pipes.
Leaky faucets and pipes
Leaky faucets and pipes are some of the most common plumbing problems. The average American household has seven leaks that waste more than 10,000 gallons of water per year. Leaks occur for a variety of reasons, such as worn washers in faucets and corroded pipes.
Faucets and showerheads can also clog up due to mineral deposits, unsatisfactory flow rate, or low water pressure, as well as external causes such as limescale buildup from hard water. If this happens, you should be thinking of getting home plumbing repair near me.
Water heater issues
The average life expectancy of a water heater is 8-12 years. There are a number of issues that can cause your water heater to fail, including rusting of the tank and erosion of the insulation.
Low water pressure
Water pressure problems are common with older homes, as the water pressure might not be high enough to push through corroded copper pipes and other plumbing fixtures.
Hot water is not available (or cold)
Hot water lines and valves should never be allowed to freeze during the winter because frozen lines will burst when they thaw out in the spring. Frozen pipes are also more susceptible to leaks, which will waste even more water.
Low hot water pressure is often due to constriction of available paths for the flow of hot water through the home, which is usually caused by scale buildup or debris clogging the pipes.
How do you unclog a main drain in a mobile home?
Sometimes the main drain line gets clogged with hair and other stuff. To clean it out, you need to use a snake.
If the drain is on an outside wall, you can drill a hole through the exterior of your mobile home, then run the snake through it from the outside. However, if the drain is inside a cabinet or wall, you’ll need to remove the cabinet or wall covering and snake from inside your mobile home.
Here’s how:
• Connect a garden hose to the end of the snake. It helps if you put a fitting on one end to connect a garden hose. Make sure that the other end has an attachment for getting into drains, such as a hook or eyelet.
• Remove any covering over the drain so you can snake it from inside your mobile home. You can just remove the cabinet and snake it from underneath, or you might have to cut a hole in the wall.
• Feed the other end of your garden hose through an open window and secure it so that water cannot escape out of the open window.
• Turn on the faucet with cold water and feed more than enough hose down the drain so that when you push the snake in, it won’t get hung up.
• Feed your snake into the drain until it reaches the clog. You’ll have to push pretty hard to force it through the clamping mechanism of your main drain line.
• Turn on a hot water faucet and feed more hose down the drain until the hose is almost submerged.
• Spray hot water from your faucet onto the clog as you use a plunger on the end of the snake to push it through. If you have a power drill, attach it to the other end and use that to force it through.
• Once the hose goes all the way through, turn off both faucets and remove the hose from inside your mobile home.
• Turn on the main drain line valve to let all the water flow down it and flush out any debris that was backed up in the drain.
• Disconnect your garden hose from the open window and use a wet/dry vacuum to suck up any water that might have gotten inside your mobile home.
• Reconnect the cabinet or wall covering.
If this doesn’t work, you might need to use a chemical method or hire a plumber who offers manufactured home repairs. If you have metal plumbing, it’s essential that you don’t use chemicals because they corrode metal over time and cause leaks.
How does a mobile home get water?
Most homes have their water lines run directly to the water meter, but mobile homes are different. Mobile home parks require a fire line that runs around the perimeter of the park with a shutoff valve for each individual home. This enables firefighters to shut off all of one owner’s utilities from a single spot if needed.
If you are living in a mobile home park with single-wide homes, you can’t always put things against the side of your home where the mainline is located because it will get wet when it rains.
How deep is the main water line?
The main water line is usually around three feet deep. Some are deeper, though, depending on where you live. For example, if you live in a desert, there may be no water available at all and the main water line would have to go up to ten feet deep.
How do you increase water pressure in a mobile home?
An increase in water pressure can be achieved by adding a water meter and/or a pump. It is possible to add an entire system (water meter, pump, and pressure regulator).
These systems are usually installed on the outside of the mobile home, but sometimes they are buried under concrete or asphalt.
Mobile home parks might have this type of system available to you for a monthly fee.
Click here to learn more info about our plumbing service areas.
FAQs
Is mobile home plumbing different? ›
Mobile home plumbing systems are hugely different from plumbing systems within stick-built homes. For one, the standards that govern them comprise of a completely different set of rules and regulations that ensure compliance with building requirements.
How does plumbing work in a mobile home? ›Manufactured home plumbing runs through the floor of the home. Your pipes are located within the belly board, which is sometimes called the bottom board, and is surrounded by insulation. The belly board closes in the insulation around your plumbing and keeps everything in place under your home's flooring system.
What is Considered a plumbing emergency? ›Definition of a Plumbing Emergency
A plumbing emergency is when there's a problem with your plumbing that will result in other damage to the occupants of your house, the house itself, or the plumbing system. Emergencies can include damaged pipes (cracked or broken), clogged drains, and heavy water loss.
What does a Plumber do? Plumbers install and repair pipes and fixtures that carry water, gas, or other fluids in homes and businesses. They also maintain plumbing fixtures like bathtubs and toilets and appliances such as dishwashers or heating systems.
What is the GREY pipe in mobile homes called? ›Polybutylene pipe is a gray plastic tubing that was commonly used as a water-supply plumbing pipe between 1978 and 1996, at which time it was discontinued due to reports of pipes rupturing. 1 In new construction, it was replaced by copper or more dependable forms of plastic pipe, such as CPVC and PEX.
What type of plumbing is used in mobile homes? ›CPVC and PEX are more common in mobile home supply lines. Both work for hot and cold water lines. These materials may last as long as the incoming copper lines used for site-built homes. The plastic pipes are cheaper and easier to install.
Can a shower and toilet share the same drain? ›In short, it is possible to connect the toilet drainage line and the shower drainage line, as long as they both have separate waste trap arms. However, do note that combining them may also lead to blockages, which can cause smells to come from certain drains.
How do you unclog the main sewer line in a mobile home? ›- Remove standing water in the sink or tub.
- Pour 1 cup of baking soda straight down the drain.
- Pour 1 cup of white distilled vinegar down the drain behind the baking soda.
- Let the baking soda and vinegar mixture rest for 1 hour.
- Pour one pot of boiling or hot water down the drain to rinse it out.
As a general rule, temperatures outside must drop to at least 20 degrees or lower to cause pipes to freeze.
Who is responsible for leaks? ›This means that as a property owner; you're responsible for the maintenance and repair of the pipes that supply water to your property. This includes all the pipes that run inside your home and outside too. For example, if there's a leak on the property boundary, then that is the homeowner's responsibility.
How long does an emergency plumber take to come out? ›
An emergency plumbing call out can take anywhere from 30 minutes to a couple of hours to be responded to. If you have a leak or a burst pipe, you can prevent further damage to your property by turning off your water supply.
How long do plumbers take to come out? ›An emergency plumber can take anywhere from 30 minutes to a couple of hours to attend your property. If you've got a leak or a burst pipe spraying water everywhere in the house, you can still stop the problem from getting worse. The first thing to do is find your stopcock or stop tap.
What questions should I ask a plumber? ›- Are you Licensed? ...
- Are you Insured? ...
- What are your Credentials and References? ...
- Are your Service Contractors Independently Licensed? ...
- What are your Service Fees? ...
- What is your Typical Response Time? ...
- What do you Charge for Travel Time? ...
- Do you Offer 24 Emergency Service?
Find out what the average Plumber salary is
The average plumber salary in Ireland is € 42 700 per year or € 21.90 per hour. Entry-level positions start at € 36 017 per year, while most experienced workers make up to € 68 250 per year.
Coli, hepatitis A and B, and typhoid fever. On roofs and in basements and crawl spaces, plumbers can also be exposed to infections from bird or rodent droppings like histoplasmosis or hantavirus, which can cause hemorrhagic fever or kidney failure.
What year did they stop using polybutylene pipes? ›Polybutylene (often abbreviated as PB) is a form of plastic that was used in residential plumbing systems from 1978 to 1995. Some experts believe as many as 10 million homes were built with these pipes.
Do polybutylene pipes always fail? ›First things first, it's extremely important that we put something out there: there is no guarantee that Quest polybutylene pipes will fail. While studies have shown at least some small amount of a causal link to polybutylene plumbing being risky, the truth of the matter is that any material can fail.
Are polybutylene pipes illegal? ›Though not banned, polybutylene pipes are no longer sold in the United States market. Most homes built after 1995 should not have polybutylene pipes, but there may still have been piping available and some plumbers may have still been using them.
What size pipes are in mobile homes? ›Plumbing Pipe Sizes for Manufactured Homes
Many manufactured home builders install a smaller pipe (3″) for drainage and venting. Site-built homes would have 4″.
The main water pipe bringing water into your mobile home often enters through the floor, so the pipe itself may be located under the mobile home. If the space below your mobile home is enclosed with walls, there should be an access panel you can open to get into the space.
How are water lines ran in a mobile home? ›
Most homes have pipes running straight through the walls into the taps or faucets, whereas most mobile home's pipes come through the floor.
Why is black water coming out the tub drain? ›What Should I Do? If discoloured or black water is coming out of the tub drain, it is sewer water. As such, it may contain bacteria and other dangerous microbes that you do not want to come into contact with. You should not try to clean up the water.
What does it mean when sewage backs up in bathtub? ›The sewer line essentially runs from your home, under your yard and connects to the city's sewer system. If the sewer line is clogged or blocked, however, then water can't freely move away from your property. And if this happens, it's likely to back up into your home through the drains, which may include the bathtub.
What do you do when your sewer backs up in the bathtub? ›- Turn off the water: At the first sign of a sewer line clog, turn off your main water supply. ...
- Check your vent pipe: When vent pipes become blocked, it prevents your sewer line from draining properly. ...
- Snake the drain: Drain snakes can be very helpful when clearing clogs in your sewer line.
All you need to do is take a cupful of baking soda and pour it down the drain. Consequently, pour a cupful of white vinegar down the same drain. Thereafter, wait for around 10-15 minutes for the baking soda and vinegar solution to break up and clear the clog.
Will pouring hot water down the drain unfreeze pipes? ›In most cases, you can unfreeze a frozen drainpipe by pouring hot water down it. Fill a pot with a half-gallon of water, and heat it on the stove. When it begins to boil, carefully remove it from the stove and slowly pour it down the drain. This may be enough to thaw the ice and completely clear your drain.
How do you unfreeze pipes under a mobile home? ›You can use a hairdryer, heat gun, heat lamp, warm towels, heating tape, and more to thaw a frozen pipe. The only method you should not use is an open flame. Using an open flame to thaw frozen piping has started many unwanted fires.
At what temp do you need to drip faucets? ›Drip outside faucets 24 hours a day (5 drops a minute). This is not necessary unless temperatures are expected to be 28 degrees or below for at least four hours. (Be sure to turn off the faucets after the threat of freezing weather.)
Who pays for water leak damage? ›If a flood or leak from a neighbouring flat causes damage in your home, then your landlord is likely to be responsible for repairing it. For example, if the water causes a ceiling in your home to collapse or plasterwork is damaged.
Can I claim for a water leak? ›You or your Loss Assessor will prepare a claim for any contents damaged as a result of the water leak. Regardless of whether the content damages are minimal or substantial, your claim must be as detailed as possible, including accurate replacement values for all affected items.
Is a leaking toilet an emergency? ›
Other major leaks: Washing machine hoses, toilet overflows, and even gas line leaks all constitute an emergency call.
How long does it take a plumber to rough in a house? ›The process required for plumbing rough-in can often require several days. While average home constructions only need three to five days for this process, several factors can extend the time.
How long does it take to install new plumbing? ›So how long does it take to install plumbing in a new house? Typically, the plumbing process for smaller homes can take around five days. Larger multi-family homes can take a few weeks, depending on the number of bathrooms you need to install.
What can a Level 1 plumber do? ›The level 1 plumbing course is suitable for total beginners with no previous experience or tradespersons such as tilers, plasterers, joiners, kitchen fitters etc who wish to undertake plumbing tasks from changing taps, plumbing in a kitchen sink including a washing machine to full bathroom replacements including ...
What size is mobile home drain pipe? ›Plumbing Pipe Sizes for Manufactured Homes
Many manufactured home builders install a smaller pipe (3″) for drainage and venting. Site-built homes would have 4″.
How to locate main water shutoff in a mobile home - YouTube
Do mobile homes have sewer vents? ›Yes, all mobile homes have ventilation systems. I've seen some articles claim mobile homes didn't have vents but it's just another mobile home myth. A ventilation system is part of the drain-waste system but it's still considered to be a separate system.
How much does it cost to replace polybutylene pipes? ›The cost to replace polybutylene pipes in Boise ranges from $4,000 to $15,000.
Do I have to replace my polybutylene pipes? ›Polybutylene pipes deteriorate after about 10 to 15 years, so if you still have them, it's past time to look into replacing them. At a minimum, watch for signs of a hidden water leak.
Can you insure a home with polybutylene pipes? ›In general, insurance companies do not provide coverage within homeowners insurance policies for polybutylene pipes. They are simply too much of a liability as they are easily damaged and will break down, burst, and damage the home.
Why does my mobile home smell like sewer? ›
Some of the items your P-trap catches when functioning properly are soap residue, hair, grease, and food particles. A good P-trap will be anywhere between 2 and 4 inches long. When your P-trap is empty of water or has been cracked, it may leak the awful smell you are currently experiencing.
How many toilets can be on a 3-inch drain? ›Referring to the International Plumbing Code, a bathroom group requires 5 Drainage Fixture Units. As a horizontal branch 3" is good for 20 DFU's or 4 bathroom groups.
What does a home water shut off valve look like? ›How to Find Your Water Shut-Off Valve & Use It - YouTube
Where is the main water shut off for a double wide mobile home? ›There are usually three possible places to cut off the water to a mobile home: inside the home, under it, and at the well or water meter. INSIDE - The shut-off valve will be near the washing machine in the laundry area, maybe behind a small, removable access panel in the wall, or in the water heater compartment.
How do I increase the water pressure in my mobile home? ›A quick and easy way to increase water pressure is to adjust the pressure-reducing valve, which can be found on the main water-supply pipe; look for a conical-shaped valve next to the water meter, close to where the main water pipe enters the house. Protruding from the top of the valve is a threaded bolt.
Where is the sewer vent pipe located on a mobile home? ›In site built homes every drain has a vent pipe that eventually goes up through the roof. The purpose is to prevent the siphon effect of water going down the drain from pulling all the water out of the trap. In mobile homes venting is frequently accomplished with one way air valves that will be located under the sink.
Do mobile homes need roof vents? ›The Manufactured Housing Construction and Safety Standards (MHCSS) requires that attics in all double-section and shingled, single-section homes be ventilated.
Can I put a garbage disposal in a mobile home? ›Since most mobile homes are connected to a septic tank, they refrain from installing garbage disposals which may have a strain on the system.